There are many construction methods today, and the light steel structure is just one of them. The advantages of light steel structure villa construction are many, but many people do not understand or dare to try. There are many cities and buildings in this way. Then the characteristics of light steel villa, what does? Many people do not know it! Today we take a look just like small series of light steel villa design tips and precautions it!

Light steel structure villa design skills

1. The load value per square meter of light steel structure floor shall not exceed the static load and load value specified in the contract. The indoor floor of the movable board room needs to be 50mm higher than the outdoor floor, and the drainage ditch should be repaired in the outdoor.

2. It is not recommended that users set up toilets in the movable board room. If they must be installed in the movable board house, please take anti-corrosion and waterproof measures. For steel components that are easily corroded, regular maintenance work such as rust removal, painting, and refurbishing should be carried out.

3. Non-professionals shall not change any structure of the movable board room. Do not arbitrarily or attempt to disassemble any of the screws and components of the movable board room.

4. Do not jump or run on the upper floor of the mobile board room. Please use the light door when using the movable panel door and window.

Light steel structure villa design features

Light steel structure villas are generally 2 or 3 layers. Due to the use of light roofing, the top structure is much less stressed than other structural layers, so the steel columns can be sectioned to save steel.

The steel beam and steel column of the roof layer structure can be rigidly connected or hinged. Because the section size and thickness of the layer structure are relatively small, the welding is easy. If the bolt connection is adopted, the whole structure scheme is more complicated, in order to simplify the construction process, the most Good to take it. The beam column can be made of square tube with 100-120mm height or double-C cold-formed thin-walled steel. The connection between the roof structure and other structural layers can be just connected or hinged.

For the aesthetic requirements, the villa house generally does not allow horizontal support and vertical support, so the structural system of the light steel villa is generally just the steel column and steel beam just connected. The connection between the secondary beam and the main structure is hinged to simplify the construction process.

Light steel structure villa design considerations

1. The structural components of the light steel villa are individually designed and manufactured in the factory. The commercialization is high and it is easy to form standards, which plays an important role in his popularity.

Second, the construction speed of light steel villas is 7-8 times that of ordinary buildings. Basically, it does not involve water problems, and it is dry construction.

Third, the main body of the light steel villa is the steel structure keel, which can be reused, and is consistent with the current policy body of energy conservation and environmental protection.

Fourth, the light weight of the light steel villa is light, the key part is high-strength connection, so even in the earthquake, it will not collapse as a whole, and the seismic performance is excellent.

5. The construction cost of light steel villas is lower than that of traditional concrete buildings, and its low cost is a great advantage.

Sixth, light steel villas can avoid the environmental hazards caused by the burning of brick kiln in traditional buildings.

7. The wall of the light steel villa is thinner than the traditional building, so its effective use area will be higher, but this does not affect his firmness.

Light steel structure villa construction is very safe, but pay more attention to the quality of building materials when building.